Bering Yachts is a shipyard in Antalya, Turkey, founded in 2007, that builds steel expedition yachts and aluminium expedition catamarans. Its founder, Alexei Mikhailov, set out to make vessels an owner could trust at sea, and the range runs from explorers under 24 metres to superyachts above that length.
Every Bering hull is built from marine-grade AH-36 steel. Where an aluminium superstructure sits on a steel hull, explosion-bonded transition joints connect the two metals. Watertight bulkheads, four or five depending on the model, divide the hull into independent compartments that keep the yacht afloat and under control if one section is breached. An impressed current cathodic protection system guards the steel below the waterline, which also carries three layers of black antifouling paint.
The Bering 72 and Bering 88 sit under 24 metres. The Bering 78 is a shallow draft, full displacement trawler type with a range above 3,000 nautical miles. Among the larger yachts, the Bering 125 and Bering 145 have reinforced steel hulls, and Ice Class 1A certification can be arranged for them on request. Boats above 24 metres are semicustom, while the smaller ones allow limited customisation.
The Bering Shipyard in Burgas, Bulgaria, adds capacity for aluminium expedition catamarans, a range that includes the BC60, BC70 and BC80. Engines use wet exhaust, which is quieter than dry stacks and recovers waste heat for domestic water. Insulation keeps noise and vibration in guest cabins beside the engine room at superyacht levels, even on the smaller boats. Interiors use wood veneer, parquet, leather, natural marble and engineered stone. The yard also runs in-house yacht management covering crew coordination, chartering, maintenance and regulatory compliance.